DTi Recommends Switching to FAA Approved Spring-Fast(R) Grommet Edging
Southborough, MA November 25, 2019 – Device Technologies, Inc. (DTi), a leading manufacturer of wire protection solutions, revealed how Lockheed Martin could save a potential $6.5M by replacing all glued in nylon grommets (MS21266) on their F-35As with Spring-Fast Grommet Edging (M22529/2).
The Pentagon’s Joint Program Office and Lockheed Martin just wrapped up a $34 billion agreement for the production and delivery of 478 F-35As at the lowest price in the program’s history. The F-35A unit cost of $77.9M represents an estimated overall 12.8% reduction vs the previous $79.2M price.
These savings were driven by the GAO which was tasked in 2015 with optimizing the F-35 program. A key area was affordability and lowering the flyaway price. In addition, the F-35 program office has “Blueprint for Affordability” initiatives which could save ~$8 billion in F-35 costs - if fully realized by Lockheed Martin.
DTi’s recommendation is simple: replace all the glued in nylon grommets (MS21266) with Spring-Fast Grommet edging (M22529/2), 
The estimated $6.5M in program cost savings can help Lockheed offset any drop in revenue from the lower price. 
Spring-Fast is simple to install, yields best in class performance and is fully qualified as an FAA approved replacement part and already has NAVAIR approval.
Nick Petri, Managing Director of DTi indicated, “Spring-Fast grommet edging provides best in class performance for half the cost. Any OEM in the aerospace vertical who uses the old nylon grommet edging with glue can take advantage of significant cost savings – and can easily estimate it using our Airframe Savings Model.”
The Airframe Savings Model used to calculate overall install cost savings for Lockheed has several components:

• Estimates of the time taken for each step in the install operation for each grommet
• The time estimate was used to calculate the install cost per grommet (below) using a $200 WRAP rate. 
• Installation Cost per MS21266 grommet - $83.68
• Installation Cost per M22529/2 grommet - $29.00
• This cost was then applied to the number of planes (478) and penetrations (250) to generate a program savings value of $6.5M

A full copy of the spreadsheet which allows you to change the # of planes, # of penetrations and the WRAP rate can be obtained at the link above.
Read more on our website.
For additional information, contact customerservice@devicetech.com (North America/Asia) or customerservice@dti-devicetech.eu (EMEA/India/Latin America).
About DTi device technologies GmbH and Device Technologies, Inc.
Device Technologies, Inc. (DTi) and DTi device technologies GmbH (DTi GmbH) design and manufacture high demand specialty wire and equipment protection components: grommet edging, enclosure seals, edge trims, radius control modules, wire protection sleeving, EMI shielding/absorber/thermal materials, and linear and selective polymer coatings for cable, wire, flat wire, stampings and profile metal-formed products.
In business since 1984, DTi serves virtually every manufacturing sector including Rail, Aerospace, Automotive, Military, Energy, IT/Datacenters, Telecom, HVAC, Medical, Gaming and Food Service.
DTi GmbH’s consulting arm, DTi Consulting, offers advanced digitalization services for manufacturers who want to optimize production spaces, processes and increase productivity. We create the data and models using leading 3D laser scanning technology for a wide range of existing building applications and production processes.
DTi continually invests in R&D to improve its products and processes to enhance cost savings and efficiency opportunities for its clients. DTi is fully compliant with ISO 9001 and AS9100 standards. 

HONG KONG, CHINA – Media OutReach – Nov 26, 2019 – Southco has expanded its successful line of constant to rque position control hinges with a new version that enables secure position control with minimal user effort. The E6 One-Way Constant Torque Hinge enables heavy doors and panels to be lifted more easily by removing friction from the hinge in one direction, while providing high torque to hold them securely in place.

E6 One-Way Constant Torque Hinge
Southco’s E6 One-Way Constant Torque Hinge provides reliable positioning with consistent operating efforts, eliminating the need for secondary support components such as gas struts and door stays to hold doors or panels in position. The E6 One-Way Constant Torque Hinge eliminates the resistance in the hinge in one direction, allowing a heavy door or panel or be easily lifted, and offers reliable hold-open functionality that prevents it from closing on the user.

Sealed for outdoor use and constructed from corrosion-resistant materials, the E6 One-Way Constant Torque Hinge offers increased longevity and requires no maintenance or adjustment over the lifetime of most applications, making it an ideal solution for off-highway access panels, automotive center consoles and industrial printers. Southco’s line of position control hinges is available in a wide variety of torque ranges, sizes and materials to satisfy a variety of application requirements.

“The E6 One-Way Constant Torque Hinge offers an economic and reliable alternative to door stays and gas struts typically used in heavy panel operation,” adds Commercial Product Manager Todd Schwanger. “The hinge provides reliable performance, and offers ergonomic and safety benefits by reducing the effort required to open heavy panels and allowing them to be held securely in position.”

About SouthcoSouthco, Inc. is the leading global designer and manufacturer of engineered access solutions. From quality and performance to aesthetics and ergonomics, we understand that first impressions are lasting impressions in product design. For over 70 years, Southco has helped the world’s most recognized brands create value for their customers with innovative access solutions designed to enhance the touch points of their products in transportation and industrial applications, medical equipment, data centers and more. With unrivalled engineering resources, innovative products and a dedicated global team, Southco delivers the broadest portfolio of premium access solutions available to equipment designers throughout the world.

By PR Editor | November 20, 2019
Southco, Inc., a global leader in engineered access solutions, has expanded its successful line of E3 VISE ACTION Compression Latches with a new version designed to resist intensive and forceful chemical cleaning procedures. Southco’s High Pressure Sealed E3 VISE ACTION Compression Latch is sealed to withstand high-pressure, high-temperature wash-down procedures to meet hygiene requirements

.

Southco’s High Pressure Sealed E3 VISE ACTION Compression Latch is sealed to IP69K to prevent liquid ingress and is DIN EN1672-2 compliant, making it an ideal solution for applications where hygiene and cleanliness is essential. With its robust stainless steel construction, the High Pressure Sealed E3 resists harsh environments and chemicals typically used in food processing machinery and medical equipment applications.
The High Pressure Sealed E3 provides the same quick, secure closure as the standard E3 series, and delivers robust, vibration-resistant fastening. Additionally, the High Pressure Sealed E3 features the same panel hole prep as the standard series for easy retrofit and is available in a variety of grip lengths to provide optimal door closure.
Global Product Manager Loc Tieu adds, “The High Pressure Sealed E3 VISE ACTION Compression Latch is designed to withstand heavy wash-downs where hygiene and easy cleaning procedures are of the highest importance. The new E3 latch provides the same consistent performance as our standard E3 Compression Latch series, and offers best-in-class compression latching.”

​By Mike Santora | November 12, 2019

Southco, Inc. has expanded its line of actuators with a keyless electronic version designed for rugged applications. Southco’s AC-10-EM Actuator with Electronic Lock/Unlock functionality eliminates the need for mechanical key access when connected to a remote access controller, such as a key fob, or to an existing control system, such as a button located within a vehicle’s interior.
Southco’s AC-10-EM Actuator with Electronic Lock/Unlock features a heavy duty design and corrosion resistant construction, providing robust protection for outdoor applications including off-highway doors and specialty vehicle storage panels. With its recessed handle and flush mount paddle design, the AC-10-EM eases operation when opening panels and doors with a gloved hand, while reducing snag and catch points.
Global Product Manager Cindy Bart adds, “The AC-10-EM Actuator with Electronic Lock/Unlock provides a convenient upgrade to electronic access control. The actuator’s corrosion-resistant construction makes it an ideal solution for outdoor applications that require robust performance and remote actuation.”

KING OF PRUSSIA, Pa.--(BUSINESS WIRE)

The end of daylight saving time means severe, cold weather is near and companies are turning up the heat. While most heating systems, if maintained properly, can last for several heating seasons, long-term asset planning is important to prevent systems from failing during extreme cold temperatures.
Whether it’s replacing a hot water heater or installing a portable heat pump for temporary or emergency use, Tozour Energy Systems has the necessary equipment to keep buildings warm while operations continue uninterrupted. Tozour’s heating solutions feature AERCO boilers and parts, and its emergency equipment rentals include MovinCool heaters as a supplemental heat source for office buildings, classrooms, hospitals, medical facilities, industrial facilities, warehouses and more.
AERCO provides the highest-quality products and system designs that deliver energy-saving, compact space heating. The Innovation and Benchmark Platinum series feature units with the greatest efficiency and performance. Tozour’s team, with its responsive call times, will install AERCO hot water heaters promptly to minimize disruptions.
Innovation – This unique tankless design has the smallest footprint of any commercial water heater and saves facility space by eliminating storage tanks and its use of common venting. Innovation provides safe, reliable hot water on demand without the need for any significant storage volume to buffer load change and provide stable hot water temperatures.
Benchmark Platinum – These units save time and money by reducing installation, startup and operating costs. Benchmark Platinum provides engineers, facilities managers and building owners the flexibility for retrofits and new construction that require one or multiple boilers.
For emergencies, MovinCool heat pumps can be the solution for temporary heating needs, as well as long-term reliability. MovinCool, well known for its industry-leading line of portable spot air conditioners, offers the Climate Pro® Series high-performance portable heat pumps, which combine both cooling and heating capabilities in a single, self-contained unit.
Climate Pro® Series – Climate Pro heat pumps are smaller and lighter than other comparable units, yet offer significantly higher, best-in-class performance. The systems are fully compatible with most standard, off-the-shelf wireless thermostats, and controllers for these portable units offer instant functionality.
“Businesses can’t afford to have extended down times,” said Kevin Duffy, president of Tozour Energy Systems. “Hot water heater installations are done quickly, and the Tozour rental service team is just a phone call away with solutions for every heating challenge.”
As well as carrying the AERCO and MovinCool lines, Tozour is the only Trane commercial equipment franchise and HVAC parts and supplies dealer for Philadelphia and South Jersey. This gives customers exclusive access to a team of dedicated service technicians as well as an inventory of Trane rental equipment, parts and supplies.
Tozour’s three Parts and Supplies locations are in King of Prussia, Pennsylvania; Pleasantville, New Jersey; and Moorestown, New Jersey.
ABOUT TOZOUR ENERGY SYSTEMS
Tozour Energy Systems is a full-service HVAC and building automation provider based in King of Prussia, Pennsylvania, and is a franchisee of Trane, a business of Ingersoll Rand. The company provides customers with a diverse range of solutions, including building automation, equipment services, energy conservation services, green building design, controls, parts, supplies and responsible technical support throughout Pennsylvania and New Jersey. Named one of the “Best Places to Work” by the Philadelphia Business Journal, Tozour Energy Systems is a member of Green Building United. For more information, visit tozourenergy.com.